InControl

Click on the Add VLAN Network Button.

Fill in the different sections to configure the new VLAN and save the settings.

NOTE: There is a different section for Peplink Switches and Routers.
Since firmware 1.2, to configure an SD Switch’s IP address, please select the switch’s device level “VLAN Network IP Settings” item under the Settings menu.

General	Name
	VLAN ID
	Applied devices (by tag or type)

Settings for Peplink SD Switch	IP settings
	Host Name
	DNS servers

Settings for Peplink Routers	Default IP Address
	Subnet Mask
	Inter-VLAN Routing
	Captive Portal

DHCP Settings	DHCP Server
	DHCP Server Logging
	Exclude IP Addresses
	Lease Time
	DNS Servers