Firmware policies can be created on organization, group or device level and assigned on a per device basis.
Firmware can be upgraded automatically for all Peplink and Pepwave models at a scheduled time.
To assign a firmware policy select organization settings > firmware or group settings > firmware policy.
The image below shows the firmware policy on organization level, which is similar to the group level.
A table shows each device model within the organization or group, the hardware revision, details about the group or organization policy assigned and a dropdown list to assign a policy.
Assign the desired firmware version from the drop-down list, upload a custom firmware or disable firmware management.
Update Schedule
Underneath the product table is a section to create an update schedule.
Creating a schedule with a time interval of approximately 15 minutes will prevent devices to upgrade and restart at the same time.
On the bottom of the page is a section showing the pending firmware update schedules.
The options on device level are similar but the layout of the page is adapted to the device specific information.
Updating Firmware by Group or Organization
To assign a firmware policy select organization settings > firmware or group settings > firmware policy.
Here you can select which firmware to update on which device models. These configurations will appear in all devices within the group. Firmware update schedules can be configured for the organization or group.
Click Save Changes to complete the process.
Updating firmware on Individual Devices
On the individual device page, navigate to Settings > Firmware Management
Select the desired firmware from the device list.
Press Save Changes to apply your changes.